Custom shower doors cost between $700 and $3,000 for the door itself, with most homeowners paying $1,000 to $2,000 before installation. Frameless configurations, thicker glass, and premium finishes push prices higher, while framed and semi-frameless options cost less. Installation, hardware, coatings, and delivery add more. A quote based on your exact measurements is the only accurate price.
What Is the Average Cost of Custom Shower Doors?
For the door only, framed custom doors typically run $500-$1,200, semi-frameless options run $800-$1,800, and frameless doors run $1,200-$3,000 or more. Installation adds roughly $200-$500 depending on location and complexity. The cost of custom glass shower doors depends on size, glass, and hardware, so these ranges are a starting point, not a promise.
| Door Type | Typical Range (Door Only) | Typical Installed |
|---|---|---|
| Framed custom door | $500-$1,200 | $800-$1,600 |
| Semi-frameless custom door | $800-$1,800 | $1,100-$2,200 |
| Frameless custom door | $1,200-$3,000 | $1,500-$3,500 |
| Corner or neo-angle enclosure | $1,500-$3,500 | $1,800-$4,000 |
Price-per-square-foot estimates typically land between $60 and $120 for frameless glass, which is useful for a quick sanity check. The real number, however, always comes from measuring the actual opening, because width, height, and wall condition change both glass area and hardware requirements.
Low-iron glass, professional coatings, and premium finishes are the three upgrades that move a quote most. A professional protective coating, for example, typically adds $150-$300 but can cut cleaning time for years, which is why many homeowners treat it as part of the installation rather than an optional extra.
What Factors Affect Custom Shower Door Prices?
Five factors drive the price: opening size, configuration, glass thickness and type, hardware finish, and complexity. Wider openings need more glass and stronger hardware; corner layouts need extra panels; low-iron glass and premium finishes add hundreds of dollars.
| Factor | Effect on Price |
|---|---|
| Opening size | More glass area and wider panels cost more |
| Configuration | Corner and multi-panel layouts cost more than straight runs |
| Glass thickness | 1/2-inch adds roughly $300-$600 over 3/8-inch |
| Glass type | Low-iron, frosted, and textured add $150-$400 |
| Hardware finish | Premium finishes add $100-$400 over standard chrome |
| Complexity | Angles, curves, and non-standard openings add design and production time |
Ask for the breakdown, not just the total. A transparent quote shows the door, glass upgrade, hardware, seals, delivery, and installation separately, which makes it easy to see where you can save and where the money is actually going.
Size matters more than style in most quotes: a 48-inch opening uses noticeably less glass and lighter hardware than a 72-inch span, so two doors that look similar can differ by hundreds of dollars. Always quote your actual opening rather than a generic “shower door” size.
How Much Does Installation Cost?
Professional installation typically runs $200-$500. Frameless doors with heavy glass cost more to hang than framed doors, and difficult access or tile work can raise the price. If you install yourself, budget for tools, anchors, silicone, and a full day of work.
- Framed and semi-frameless: more DIY-friendly; panels are lighter and more forgiving.
- Frameless: heavier glass needs precise leveling and drilling into tile; professional help is common.
- Hidden costs: wall repair, waterproofing, old-door removal, and disposal are usually separate.
- Access: tight staircases, upper floors, and old tile that needs drilling raise labor time and cost.
Getting the installation method right matters as much as the door price, because a badly hung frameless door will leak no matter how much the glass cost.
A good installer will also tell you before the job whether the wall needs shimming or waterproofing work. Catching that at the estimate stage is far cheaper than discovering it in the middle of installation.
Are Frameless Shower Doors More Expensive Than Framed Doors?
Yes, usually. A frame carries the glass, so framed doors use thinner, cheaper panes and simpler hardware. Frameless doors need thicker tempered glass and precision hinges, which pushes the price higher, but many homeowners consider the cleaner look worth it.
- Framed: lowest cost, easiest installation, more visible metal.
- Semi-frameless: middle ground; cleaner look with less hardware cost.
- Frameless: highest cost; the most open, modern appearance.
Compare frameless vs. framed in detail before you commit, because the difference is visible in the room every single day.
The price gap is real, but so is the daily difference: a frameless door lets the tile and light carry the room, while a framed door adds a visible metal line around the glass. If the bathroom is already the statement space of the home, that trade-off usually justifies the extra cost.
How Can You Save Money on a Custom Shower Door?
Choose semi-frameless instead of fully frameless, keep standard glass thickness unless you have a wide span, pick a popular finish, and get a complete quote that includes hardware, seals, and delivery. New MCOCOD subscribers can also take advantage of the store’s promotional discount.
- Keep 3/8-inch glass unless you have a wide, frameless span that needs 1/2-inch.
- Choose chrome or a standard finish instead of a custom color.
- Install yourself if the style and your skill level allow it.
- Order during a promotional window and combine it with the new-subscriber discount.
Saving money should not mean skipping the warranty. A door without coverage can cost more than the savings the first time a hinge or seal fails, so compare total value rather than the lowest sticker.
Timing matters too. Because MCOCOD offers promotional discounts for new subscribers, signing up before you order can reduce the final price, and the discount applies to a purchase you were going to make anyway.
What Do MCOCOD Prices Include?
MCOCOD prices cover made-to-measure fabrication in your chosen configuration and finish, backed by a ten-year warranty. The store supports the purchase with professional installation resources, rapid shipping, and a full catalog of replacement parts and accessories.
- Ten-year warranty on manufacturing quality for glass and hardware.
- Premium finishes including brushed gold, matte black, and chrome.
- Installation resources for homeowners who want professional guidance.
- Replacement parts such as seals, sweeps, and hardware for long-term maintenance.
- Promotional discounts for new subscribers.
Because MCOCOD manufactures rather than only resells, the quote reflects real fabrication for your opening, and the support continues after delivery instead of ending at checkout.
The Ten-Year Warranty and Long-Term Value
A ten-year warranty signals stronger manufacturing and better hardware, because the supplier expects the door to last. Compare what is covered – glass, hardware, and finish – rather than only the sticker price, since a cheap door with no warranty can cost more in the long run.
- Check what the warranty covers: glass, hardware, finish, or all three.
- Check the claim process: who handles shipping and labor if a part fails.
- Check whether replacement parts stay available years after purchase.
For a product installed once and used daily for a decade, coverage is part of the price. A door that must be replaced in year three because of a failed hinge was never cheap.
The same logic applies to finishes: a premium finish is only worth the money if the supplier stands behind it, which is why warranty terms belong in the comparison rather than an afterthought.
MCOCOD Expert Views
The first question we hear is “what does it cost?”, and the honest answer is “it depends on your opening”. A 60-inch frameless double slider and a 28-inch pivot door are completely different products, so any fixed price you see online is either an average or a starting point. Get three numbers before you compare: the door, the hardware, and the installation. Then look at what is included – delivery, seals, warranty, and support after the sale. We see homeowners overpay in two ways: paying for 1/2-inch glass on a small framed opening where it adds nothing, or saving $200 on hardware that is not rated for the weight of the panel. A ten-year warranty is our way of saying we expect the door to be there, working smoothly, long after the invoice is forgotten. Measure first, compare the full package, and choose the configuration your bathroom actually needs.
Frequently Asked Questions
Does the price include installation?
Not always. Confirm whether the quote covers delivery, hardware, seals, and installation so there are no surprises.
Why do frameless doors cost more?
They require thicker tempered glass and precision hardware to support the weight without a frame.
Can I get an exact quote before ordering?
Yes. Follow our measuring guide, send the numbers and your preferences to MCOCOD, and the quote will reflect your actual opening, configuration, and finish. Use our step-by-step measuring guide so the dimensions are reliable.
Are discounts available?
Yes. New subscribers receive a promotional discount, and MCOCOD runs periodic promotions on its catalog.
The Bottom Line
Budget for the whole package – door, hardware, delivery, and installation – not just the glass. Choose the configuration your bathroom needs, keep upgrades purposeful, and weigh the warranty as part of the price. Then request a quote for your exact measurements so the number you plan around is real.
Keep the final comparison simple: the same configuration, glass, and finish from three suppliers should be compared line by line, because the door price alone rarely tells the whole story.
Request a custom quote with your measurements, and we will confirm every line item before you commit.